Gel Candle
Type 1 | Type 2
|
|
Gel Candle by Aleena Rose |
 |
|
Materials Required:
-
Gel Wax - 1/2 Kg
-
Glass Tumbler
-
Wax Crayons
-
Vessel (Aluminum vessel for melting the wax)
-
Wick
-
Scissors
-
Sticks
-
Glitter Powder
-
Beads, Shells etc.
-
Something small but heavy eg: a screw
Method of making:
Take the glass with which you are planning to make the gel
candle. Now, take the gel wax and with your hand, fill the glass with the wax.
This is just to know the amount of wax required for filling the glass you are
using. Now, put all the required wax into the vessel which is used for melting
wax. Always keep a separate vessel for melting wax. It is not hygienic to use it for
cooking purposes. After emptying the
glass, keep a wick in the middle of the glass tumbler. Use a stick and roll one
end of the wick around it, so that you can hang the other end of the wick into
the glass. Keep the stick on the rim of the glass for support. Tie something
heavy at the end of the wick (the side which is hung into the glass). So that
the wick won't move away from it's position, while you are pouring the melted
wax.
Now melt the wax on the stove and add the required colour into
it . Cut the required amount of the wax crayon and add it into the wax, while it is
being melted. Stir constantly and as soon as all the wax melts, turn off the
stove.
Now, slowly pour the melted wax into the glass tumbler. After
pouring wait for at least 2-3 minutes and then you can put things like beads,
glitter etc
into the wax. Keep the candle aside, for setting. As the gel candle is
transparent, any embedding will be seen from outside. This will give the candle a good
look.
After it sets, cut the remaining wick (the wick which
was rolled up onto the stick) and your candle is ready to use.
|
|
